Kolar Shotguns and Specs

Kolar Arms Competition Shotguns Deliver The Mark of Performance

Triggering Expectations into Victories

Kolar Shotguns have won numerous World Skeet, National Sporting Clays, and ATA Grand American titles. Kolar champions express over and over how Kolar shotguns deliver The Mark of Performance:

  • Tailored for Consistency
  • Most Precise P.O.I. Adjustments
  • Interchangeable Trigger Group
  • Precise Trigger Pull
  • Fast and Easy Reconfiguration
  • Selectable and Adjustable
  • Maximum Strength and Absolute Tolerances

Click a link below to jump to the competition shotgun and specs of your choice as well as wood and engraving.

Max Trap T/A High Profile – Over/Under – Showing Standard

Max Trap T/A High Profile – Unsingle –Showing Standard

Max Trap T/A High Profile – Over Single – Showing Standard

Max Trap T/A Low Profile – Over/Under –Showing Standard

Max Trap T/A Low Profile – Unsingle – Showing Standard

Max Trap T/A Low Profile – Over Single (32″ barrel length only w/adjustable rib) – Showing Standard

Precisely Set P.O.I.
The Kolar Max Trap T/A is available with either 34” un-single, 34” over-single or a 30” or 32” over-under. It features fully adjustable ribs on all barrels. With the addition of the new standard low-profile (LP) rib, the Max Series TA combo now offers a range of Point Of Impact (P.O.I.) capability from 60% to 150%.

All combos are delivered with the barrels set to the same P.O.I. unless otherwise specified.

Maximum Pattern Efficiency
The barrels on the Kolar Max Trap T/A are the new light contour .740 bore, with extra-long forcing cones and factory CTs for maximum pattern efficiency.

A weight kit is available to meet your specific balance requirements when choosing the over-single barrel.

Unobstructed Target Acquisition
Stocks are designed to promote a heads-up gun mount, which promotes rapid unobstructed target acquisition. All stocks are fitted with a six-way adjustable comb. The forend is an extended beavertail design. Both stock and forend are cut from high-quality English walnut.

All guns are supplied in a Kolar hard case. New Kolar Custom Negrini Design.

GAUGE: 12GA. CHAMBERED 2.75”
FINISH: RECEIVER/IRON BARRELS SATIN NICKEL, STANDARD MATTE BLUE, STANDARD GLOSS BLUE, OPTIONAL
BARRELS: 30″ AND 32″ O/U, 32″ SINGLE BARREL ONLY. AVAILABLE IN LOW PROFILE ADJUSTABLE RIB 34” AVAILABLE T/A HIGH TOP SINGLE WITH ADJUSTABLE RIB, T/A HIGH UNSINGLE WITH ADJUSTABLE RIB, LOW PROFILE FIXED RIB TOP SINGLE IN 80% OR 100% FIXED POI. .740 LITE CONTOUR W/CT AND X-LONG FORCING CONE 
RIBS: RAMP TAPER VENTED W/ADJUSTABLE P.O.I.
TRIGGER: PULL OR FACTORY RELEASE ALL COIL SPRING DRIVEN, ADJUSTABLE FOR FINGER LENGTH. FACTORY RELEASE OPTIONAL.
STOCK & FOREND: ENGLISH WALNUT W/BEAVERTAIL FOREND. ALL STOCKS AVAILABLE IN RH OR LH CONFIGURATIONS WITH ADJUSTABLE COMB.

Max TrapT/A High, Unsingle – Adjustable rib

 

HIGH: 60%-100% P.O.I.
EXTRA HIGH: 100%-150% P.O.I.

 

Max Trap T/A High, Top single – Adjustable rib

HIGH: 70%-100% P.O.I.
EXTRA HIGH:  100%-140% P.O.I.

 

Max Trap T/A High, O/U – Adjustable rib

HIGH: 65%-100% P.O.I.
EXTRA HIGH: 100%-150% P.O.I.
 

Max Trap T/A Low, Unsingle – Adjustable Rib

LOW PROFILE:  60%-90% P.O.I.
 

Max Trap Low, Top Single, O/U – Fixed Rib

LOW PROFILE: 80% or 100% P.O.I.

 

COIL SPRING DRIVEN TRIGGER  
SIX-WAY ADJUSTABLE STOCK (STANDARD FEATURE)  
 

Here you can define the content that will be placed within the current tab.

TRAP RAMP RIB COMBO COMB DIMENSIONS HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
T1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
T2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
T3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
T4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4
TRAP STANDARD ADJUSTABLE COMB DIMENSIONS HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
LP1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
LP2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
LP3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
LP4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4
TRAP HIGH ADJUSTABLE COMB DIMENSIONS HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
A1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
A2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
A3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
A4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4
TRAP EXTRA HIGH ADJUSTABLE COMB DIMENSIONS HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
X1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
X2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4

Max Trap Low Profile Fixed

Max Trap Low Profile – Over Single – Fixed Point of Impact (80% or 100% available) – Showing Standard

Max Trap Low Profile – Over/Under – Fixed Point of Impact (80% or 100% available) – Showing Standard

Precisely Set P.O.I.
The new Kolar Max Trap Low Profile fixed rib is available with either 34” over-single, 32” or 30” over-under in 80% or 100% fixed point of impact. 

All combos are delivered with the barrels set to the same P.O.I. unless otherwise specified.

Maximum Pattern Efficiency
The barrels on the Kolar Max Trap Low Profile are the new light contour .740 bore, with extra-long forcing cones and factory CTs for maximum pattern efficiency.

A weight kit is available to meet your specific balance requirements when choosing the over-single barrel.

Unobstructed Target Acquisition
Stocks are designed to promote a heads-up gun mount, which promotes rapid unobstructed target acquisition. All stocks are fitted with a six-way adjustable comb. The forend is an extended beavertail design. Both stock and forend are cut from high-quality English walnut.

All guns are supplied in a Kolar hard case. New Kolar Custom Negrini Design.

GAUGE: 12GA. CHAMBERED 2.75”
FINISH: RECEIVER/IRON BARRELS SATIN NICKEL, STANDARD MATTE BLUE, STANDARD GLOSS BLUE, OPTIONAL
BARRELS: AVAILABLE WITH EITHER 34” OVER SINGLE, 32” or 30” O/U IN 80% OR 100% FIXED POINT OF IMPACT.  .740 LITE CONTOUR W/CT AND X-LONG FORCING CONE 
RIBS: RAMP TAPER VENTED 
TRIGGER: PULL OR FACTORY RELEASE ALL COIL SPRING DRIVEN, ADJUSTABLE FOR FINGER LENGTH. FACTORY RELEASE OPTIONAL.
STOCK & FOREND: ENGLISH WALNUT W/BEAVERTAIL FOREND. ALL STOCKS AVAILABLE IN RH OR LH CONFIGURATIONS WITH ADJUSTABLE COMB.
TRAP STANDARD ADJUSTABLE COMB DIMENSIONS HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
LP1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
LP2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
LP3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
LP4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4

Max Trap T/S

Max Trap T/S 

Maximum Strength for a Lifetime of Use
Receiver and forend iron are CNC machined from a solid bar of 4140 chrome-moly steel to withstand the rigors of a lifetime of use. The receiver, with its full hinge pin and a massive locking bolt, serve to balance the gun and contribute to its extremely soft recoil characteristics. A unique ejector system allows for ejection of spent shells, or it can be adjusted to lift only.

Absolute Tolerances & Perfect Balance
The trigger housing and mechanism are also CNC machined to afford absolute tolerances. The hammer and sears are precision EDM wired from hardened tool steel to maintain crisp, consistent trigger feel. Trigger weight is set at a nominal 3.5 lbs. An optional factory release trigger is also available.

Superb Pointability & Minimal Recoil
The Kolar Max Trap T/S features an adjustable ribbed 34” barrel of mid placement design for superb pointability and minimal recoil. The barrel is available in a .740 lite contour.

Precise & Consistent Point of Impact
Point-of-impact is perfected with a rib hinged at the breech and muzzle. This ensures precise, consistent Point Of Impact (P.O.I.). in all conditions. Ribs are of a ramp taper design and are available to allow for P.O.I. of 60% to 120%.

Handcrafted Details
Stocks and forends on all Kolar Max Trap T/S guns are cut from English walnut and are available in right or left-hand configurations. Both are fitted with an adjustable comb and the forend is a beavertail design. The Kolar Max Trap T/S is available in standard grade with engraved configurations to follow. 

All guns are supplied in a Kolar hard case.  New Kolar Custom Negrini Design.

GAUGE: 12GA. CHAMBERED 2.75”
FINISH: RECEIVER/IRON BARRELS SATIN NICKEL, STANDARD MATTE BLUE, STANDARD GLOSS BLUE, OPTIONAL
BARRELS: 34”L .740 LITE CONTOUR W/CT AND X-LONG FORCING CONE 
RIBS: RAMP TAPER VENTED W/ADJUSTABLE P.O.I.
TRIGGER: PULL OR FACTORY RELEASE ALL COIL SPRING DRIVEN, ADJUSTABLE FOR FINGER LENGTH. FACTORY RELEASE OPTIONAL.
STOCK & FOREND: ENGLISH WALNUT W/BEAVER TAIL FOREND. ALL STOCKS AVAILABLE IN RH OR LH CONFIGURATIONS WITH ADJUSTABLE COMB.

Max Trap TS / Adjustable Rib

STANDARD: 60%-90% P.O.I.
HIGH: 70%-100% P.O.I.
EXTRA HIGH: 90%-120% P.O.I.
FULLY ADJUSTABLE RIB (STANDARD FEATURE)
A OR B HANGER
COIL SPRING DRIVEN TRIGGER  
SIX-WAY ADJUSTABLE STOCK (STANDARD FEATURE)  
TRAP SINGLE STOCKS COMB DIMENSIONS HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
S1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
S2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
S3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
S4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4
S5 1 5/8 1 5/8 3 1/4 0 1/4 5/8 4 14 3/4
S6 1 5/8 1 5/8 3 1/4 0 1/2 5/8 4 14 3/4

Max Skeet

Max Skeet Adjustable – Standard

Max Skeet Fixed Ramp Taper – Standard

Dynamic Feel & Pointability
The legendary Kolar Max Skeet available in both Standard and Lite Models allowing the shooter the ability to choose the perfectly balanced shotgun depending on the shooter’s style. Featuring both the fixed ramp tapered rib for the more traditional shooter, and the adjustable ramp tapered rib for the shooter who prefers the advantage of precisely setting the P.O.I. from 50% to 70% while promoting a heads up, eyes level shooting position. Additionally, the hard coated T6061 rib offers a significant rigidity and lower mass. This gives the Max Skeet a dynamic feel and pointability unmatched in a tubed gun.

Maximum Pattern Efficiency
The standard barrels on the Kolar Max Skeet are semi-lite low recoiling .740 lite contour bore, with extra-long forcing cones and factory CTs. All skeet guns are fitted with Kolar Max AAA tube systems. The gun is also available as a matched weight, 2-barrel carrier set.

Precise, Consistent Trigger Pull
The re-designed Stage II mechanical trigger is selectable and adjustable for trigger blade placement. It features a patented interlock to eliminate the possibility of fan-firing. The all coil spring driven Stage II trigger features an enhanced hammer/sear configuration to ensure precise, consistent trigger pull.

The Precision of a Custom Stock
Kolar offers multiple factory stock dimensions allowing the shooter the flexibility to achieve a custom fit out of a factory available stock. This flexibility is unmatched in the industry and is essential for proper gun fit. This allows instant recognition of target line and variance. All stocks are fitted with new L/W titanium hardware and a six-way adjustable comb as standard equipment. A special L/W heel adjuster is optional. When combined with the adjustable comb you have all the precise fitting benefits of a custom stock.

Handcrafted Details
The forend is the traditional beavertail design. Both stock and forend are cut from high-quality English walnut. All guns are supplied in a Kolar hard case.

All guns are supplied in a Kolar hard case.  New Kolar Custom Negrini Design.

MAX SKEET STANDARD

GAUGE: 12GA. CHAMBERED 2.75”
FINISH: RECEIVER/IRON BARRELS SATIN NICKEL, STANDARD MATTE BLUE, STANDARD GLOSS BLUE, OPTIONAL
BARRELS: OVER/UNDER 30”/.740 LITE CONTOUR BORE, XLC, CT/CT; W/MAX AAAS 32”/.740 LITE CONTOUR BORE, XLC, CT/CT; W/5 EXTENDED CTS
RIBS: TAPERED RIB FIXED, RAMP 50/50 OR 60/40 P.O.I. FULLY ADJUSTABLE. BARRELS PRE-SET AT FACTORY FOR 60% P.O.I. ADJUSTABLE FROM 50/50 TO 70/30.
TRIGGER: MAX STAGE II W/INTERLOCK ALL COIL SPRING DRIVEN, ADJUSTABLE FOR FINGER LENGTH. FACTORY RELEASE OPTIONAL.
STOCK & FOREND: ENGLISH WALNUT W/BEAVER TAIL FOREND. ALL STOCKS AVAILABLE IN RH OR LH CONFIGURATIONS WITH ADJUSTABLE COMB.
APPROX. WEIGHT:**: 9.5 LBS RAMP TAPERED ADJUSTABLE W/ MAX AAA 20,28 & 410 INSERTS
9.25 LBS RAMP TAPERED FIXED W/ MAX AAA 20,28 & 410 INSERTS

**WEIGHT MAY VARY BASED ON WOOD DENSITY

MAX LITE SKEET 2BBL CARRIER

GAUGE: 12GA. CHAMBERED 2.75”
FINISH: RECEIVER/IRON BARRELS SATIN NICKEL, STANDARD MATTE BLUE, STANDARD GLOSS BLUE, OPTIONAL
BARRELS: OVER/UNDER 30”/32” CARRIER SYSTEM BASED ON .740 LITE CONTOUR BARRELS
CARRIER 2 BBL SET W/MAX AAA 20, 28 & .410 INSERTS W/MATCHING .740 LITE CONTOUR /30” OR 32” BBL
RIBS: TAPERED RIB FIXED, RAMP 50/50 OR 60/40 P.O.I. FULLY ADJUSTABLE. BARRELS PRE-SET AT FACTORY FOR 60% P.O.I. ADJUSTABLE FROM 50/50 TO 70/30.
TRIGGER: MAX STAGE II W/INTERLOCK ALL COIL SPRING DRIVEN, ADJUSTABLE FOR FINGER LENGTH. FACTORY RELEASE OPTIONAL.
STOCK & FOREND: ENGLISH WALNUT W/BEAVER TAIL FOREND. ALL STOCKS AVAILABLE IN RH OR LH CONFIGURATIONS WITH ADJUSTABLE COMB.
APPROX. WEIGHT:**: 9.0 – 9.25 LBS* 30”/32” BBL RAMP TAPERED ADJUSTABLE CARRIER 2 BARREL SET W/ .740 LITE CONTOUR
8.75 – 9.0 LBS* 30”/32” BBL RAMP TAPERED FIXED CARRIER 2 BARREL SET W/ .740 LITE CONTOUR

**WEIGHT MAY VARY BASED ON WOOD DENSITY

 

ADJUSTABLE RIB
STANDARD: 50/50% – 70/30% P.O.I.
FIXED RAMP TAPERED RIB
STANDARD: 50/50% – 70/30% P.O.I.
ADJUSTABLE P.O.I. SYSTEM 50/50% – 70/30% P.O.I.  
SUB-GAUGE CARRIER BARREL  
AAA SUB-GAUGE TUBES  
FIXED RAMP RIB  
STAGE II COIL SPRING DRIVEN TRIGGER (STANDARD FEATURE)  
SIX-WAY ADJUSTABLE STOCK (STANDARD FEATURE)  
MAX SKEET RAMP TAPERED ADJUSTABLE RIB COMB DIMENSIONS MONTECARLO HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
LP1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
LP2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
LP3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
LP4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4
MAX SKEET RAMP TAPERED FIXED RIB COMB DIMENSIONS MONTECARLO HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
CFD 1 1/2 1 7/8 2 1/2 0 1/8 1/4 4 14 3/4
CLP 1 1/2 1 1/2 2 1/2 0 1/8 1/4 4 14 3/4

Max Lite Sporting & Max Clays Flat

NEW! Max Clays Flat Taper

Max Lite Sporting Adjustable Standard

Max Lite Sporting Ramp Taper Legend

NEW Kolar Max Clays Flat Taper:
• .740/1550 g LT Barrel
• 30″ or 32″ Fixed or Adjustable Ribs
• X-L ong Forcing Cones w/Titanium CT’s
• Matched Weight Sub Gauge Carrier Sets Available
• Mechanical, Coil Spring Driven Interlock Trigger
• RH and LH Stocks, w/Adjustable Comb

Max Lite Sporting:
Adjustability, Speed & Precision

The Kolar Max Lite Sporting is now offered in both fixed and adjustable ramp tapered rib configurations. The more traditional fixed ramp tapered rib can be factory set at 50/50 or 60/40 P.O.I. The adjustable ramp tapered rib configuration allows the shooter the advantage of a raised head position for instant target recognition. You also have the ability to precisely set P.O.I. from 50/50 to 70/30. The ribs’ lower mass allows you to get the lighter barrels on the target more quickly for a faster shot.

Tailored for Consistency
The Kolar Max Lite Sporting stock is available in multiple stock options giving the shooter the ability to choose the proper configuration resulting in a custom fit. All stocks are fitted with a standard six-way adjustable comb. An L/W heel adjuster is optional. This results in a tailored, precise fitting stock that promotes a more consistent gun mount. The forend is a traditional Euro design, and both the stock and forend are cut from English walnut.

Maximum Pattern Efficiency & Low Recoil
The standard barrels on the Kolar Max Lite Sporting are Kolar’s innovative .740 lite contour. Combined with extra-long forcing cones and precise taper factory titanium CTs, they provide maximum pattern efficiency and extremely low recoil characteristics. The gun is available with a matched weight carrier barrel and Kolar Max Lite Sporting AAA inserts for sub-gauge events.

Selectable & Adjustable
The re-designed Stage II mechanical trigger is selectable and adjustable for trigger blade placement. It features a patented interlock to eliminate the possibility of fan-firing. The all coil, spring driven Stage II trigger features an enhanced hammer/sear configuration to ensure precise trigger pull.

All guns are supplied in a Kolar hard case.  New Kolar Custom Negrini Design.

MAX LITE SPORTING & MAX CLAYS SPECS

**WEIGHT MAY VARY BASED ON WOOD DENSITY

Download Spec Sheet

 

FIXED FLAT TAPERED 
STANDARD: 50/50% – P.O.I.
ADJUSTABLE TAPERED
STANDARD: 50/50% – 70/30% P.O.I.
FIXED RAMP TAPERED 
STANDARD: 60% P.O.I.
ADJUSTABLE P.O.I. SYSTEM 50/50% – 70/30% P.O.I.  
SUB-GAUGE CARRIER BARREL  
AAA SUB-GAUGE TUBES  
FIXED RAMP RIB  
STAGE II COIL SPRING DRIVEN TRIGGER (STANDARD FEATURE)  
SIX-WAY ADJUSTABLE STOCK (STANDARD FEATURE)  
CLAYS ADJUSTABLE RIB COMB DIMENSIONS MONTECARLO HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
LC1 1 5/8 1 5/8 2 3/4 0 1/4 5/8 4 14 3/4
LC2 1 5/8 1 5/8 2 3/4 0 1/2 5/8 4 14 3/4
LC3 1 5/8 1 5/8 3 1/4 0 1/4 3/4 4 14 3/4
LC4 1 5/8 1 5/8 3 1/4 0 1/2 3/4 4 14 3/4
CLAYS FIXED RIB COMB DIMENSIONS MONTECARLO HEEL CAST OFFSET TOE GRIP LENGTH L.O.P.
CFD 1 1/2 1 7/8 2 1/2 0 1/8 1/4 4 14 3/4
CLP 1 1/2 1 1/2 2 1/2 0 1/8 1/4 4 14 3/4

Wood/Upgrades & Engraving

Fine Woodworking

The stocks and forends on all Kolar guns are cut from English walnut and are available in both right or left-hand configurations. All Stocks include an adjustable comb.

Wood Upgrades
Standard Grade: ST/FE w/comb - $3,800
Standard Plus: ST/FE w/comb - $4,550
Grade II: ST/FE w/comb - $5,400
Grade III: ST/FE w/comb - $7,000
Grade IV: ST/FE w/comb - POR
Turkish Grade IV: ST/FE w/comb - POR
*Not available w/Standard Grade guns
* All Turkish/$1,000 premium

Wood upgrades commensurate with model, are supplied with all engraved guns at Kolar's discretion.
IE: Gold Royale gets Grade III

New gun custom fitting fee: $3,800 New, no discount+blank
New gun custom dimensions: $800 New, no discount+blank (lower comb and L.O.P. are only the exceptions

Requests for aftermarket new stocks or custom stock sessions will be considered only as available and will be POR.

Invest In Your Individuality

To satisfy individual preferences and personal tastes, Kolar offers a limited number of standard engraving patterns. Since every Kolar engraving is hand-cut, each final product is unique. As a result, even the standardized engraving styles are somewhat different in their final execution.  An appropriate wood upgrade is included with custom engraving. 

Regal

A new model replacing the Legend features a medium relief hand-cut abstract style scroll. 100% coverage with a pierced top layer. All guns with this option have matte finish barrels, super standard wood, and complete gold triggers. Includes the Xtra package.

Royale

A limited-edition deep relief classic pattern with 100% coverage. This model is supplied with the Xtra package.

Gold Royale

Premier

The Premiere Extra features 100% relief scroll coverage, designed by Bottega Incisorie master, Dario Cortini.
Available with a full set of standard and optional features, in SC, Skt, and trap models. The pattern features an elegant, yet unique flower and leaf design. It emanates from the breech face and flows forward covering all surfaces. Of particular significance is the deep cut, instantly recognizable Kolar Griffin cut in the receivers under the panel.

Custom Grade

Our engravers can customize your Kolar to give it the personal enhancement that makes it uniquely yours. Whether your preferences are a deep relief scroll or an intricate Bulino style, we can engrave your gun to any scene or style you specify.

Kolar Distributors

Elite Shotguns - CA
Dan Lewis
415-205-3387

dan@elite-shotguns.com
2413 Magnolia Avenue
Petaluma, CA 94952

Elite Shotguns - KY
Aaron Willoughby
606-481-0955
aaron@elite-shotguns.com
110 Frames Branch Road
Clay City, 
Kentucky 40312

Elite Shotguns - PA
Donny Watt & Bob Woods
412-213-3557
elite@elite-shotguns.com
3179 Harts Run Road
Glenshaw, PA 15116

Elite Shotguns - TX
National Shooting Complex
Cameron Schuster
830-334-1593

cameron@elite-shotguns.com
5931 Roft Rd., San Antonio, TX 78253

Elite Shotguns - AZ
All American Armory/Elite Shotguns Store
Ryan Costanti
360-661-2131
ryan@allamericanarmory.us 
7800 W Old Ajo Hwy
Tucson, AZ  85735

Elite Shotguns - WA
All American Armory/Elite Shotguns Store
360-766-4056
allamericanarmoryus@gmail.com

14969 W Bow Hill Rd.
Bow, WA 98232

Elite Shotguns - FL
Vero Beach Clay Shooting Sports
772-978-0935
info@verobeachclayshooting.com
verobeachclayshooting.com
5925 82nd Avenue
Vero Beach, FL 32966

Paxton Arms
Robert Paxton
(214) 651-9018
rpaxton@paxtonarms.com
797 N. Grove Road Unit# 103
Richardson, TX 75081

Purbeck Shooting School – United Kingdom
+44 1929 405101
Puddletown Road
Wareham BH20 7NG

Lawry Shooting Sports – Canada
905-765-3343
25 Industrial Dr.
Caledonia, ON N3W 1H8, Canada

Gamemasters- IL
Steve Brink
Sbrink35@icloud.com
5100 Broadway St, Quincy, IL 62305
217-221-9300    

Gamemasters- AZ/Mobile
John Harden
317-840-6384
jjharden@comcast.net
Tucson Trap and Skeet
7800 W Old Ajo Hwy, Tucson, AZ 85735

Target Shotguns, Inc.
Bob Schultz
828-693-3833
Steven Rademacher
Head Sales Manager

steven@targetshotguns.com 
118 Edney St., Hendersonville, NC 28792

Kolar Arms Corporate Office

1925 Roosevelt Avenue
Racine, WI 53406
Ph: (262) 554-0800
Fax: (262) 554-9093

Email Kolar Direct

info@kolararms.com

Follow Us!